EN
PTDeep Drawing Quality (DDQ). High-formability alloys engineered for deep drawing processes and sterility. Essential for beverage cans, closures (EOE), food containers, and pharmaceutical packaging.
Specification
- Aluminium
- DEEP DRAWING & PACKAGING
- STANDARD
| Category | ASTM Grade (USA) | JIS Grade (Japan) | EN Grade (Europe) | Yield Strength (MPa) | Tensile Strength (MPa) | Elongation (Min %) | Typical Applications / Used For |
| DEEP DRAWING & PACKAGING | AA 8011 | A 8011 | EN AW-8011 | ≥ 90 | 110 – 150 | 3 – 7% | Pharmaceutical packaging, bottle caps (ROPP), food containers, foil. |
| DEEP DRAWING & PACKAGING | AA 3104 | A 3104 | EN AW-3104 | ≥ 215 | 275 – 325 | 2 – 6% | Beverage cans (Body stock), closures, deep drawn containers. |
| DEEP DRAWING & PACKAGING | AA 1050 | A 1050 | EN AW-1050A | ≥ 85 | 105 – 145 | 6 – 12% | Cosmetic caps, lamp bases, general packaging applications. |
Specification
- Aluminium
- DEEP DRAWING & PACKAGING
- CHEMICAL COMPOSITION
| Category | Alloy (AA) | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Remarks |
| PACKAGING | 3104 | 0.6 | 0.8 | 0.05-0.25 | 0.8-1.4 | 0.8-1.3 | – | 0.25 | 0.1 | distinguish 3004 by Cu/Fe |
| PACKAGING | 8011 | 0.50-0.9 | 0.6-1.0 | 0.1 | 0.2 | 0.05 | 0.05 | 0.1 | 0.08 | Al-Fe-Si alloy |
MRM Steel specializes in supplying high-quality Aluminium Alloy, ensuring consistent material properties and strict adherence to international standards. For detailed consultation on specific grades and quotations, please contact our Sales Department directly.
Please find the detailed technical specifications below:
Please find the detailed technical specifications below:
Specification
- Aluminium
- DEEP DRAWING & PACKAGING
- ORDERING INFORMATION
| NO | Parameter / Item | Description & Examples | Remarks for Trading |
| 1 | Standard Specification | ASTM B209 / JIS H4000 / EN 485 | Specify the governing standard for inspection and tolerance (USA, Japan, or Europe). |
| 2 | Alloy Designation | AA 1050 / 3003 / 5052 / 6061 … | Must specify the exact 4-digit Alloy series. Do not use generic terms like “Aluminium Sheet”. |
| 3 | Temper Designation | O / H12 / H14 / H24 / H32 / H116 / T6 | Critical for mechanical properties. • O: Annealed (Soft) • H1x/H3x: Strain Hardened • T6: Heat Treated |
| 4 | Dimensions | Thickness (mm) x Width (mm) | • Thickness Tolerance: ± 0.02mm to ± 0.05mm • Width Tolerance: +1.0/-0mm |
| 5 | Coil Weight | Unit Weight (MT) e.g., Min 2.5 MT – Max 5.0 MT | Aluminium coils are lighter than Steel coils (typically 2-4 MT/coil vs. 20 MT for HRC). |
| 6 | Coil I.D. (Inner Diameter) | 405 mm / 505 mm / 610 mm | 505 mm is the most common industry standard for Aluminium. (Steel is typically 508/610mm). |
| 7 | MOQ | 25 tons | |
| 8 | Surface Finish | Mill Finish (MF) / Stucco Embossed | Mill Finish is the standard raw finish. Specify if “Low Oil” or “Dry Surface” is required. |
| 9 | Surface Protection | Paper Interleaved / PE Film Coated | • Paper Interleaved: To prevent scratches/water stain. • PE Film: Blue/Clear film for surface protection during fabrication. |
| 10 | Core Type | Aluminum Core / Fiber (Paper) Core / Steel Core | Aluminum or Fiber Core is preferred to prevent galvanic corrosion (rust) from inside. |
| 11 | Edge Condition | Mill Edge / Slit Edge (Trimmed) | • Mill Edge: As rolled (rough). • Slit Edge: Precision cut (clean). |
| 12 | End Application | e.g., Roofing, Deep Drawing, Marine, PCB… | Essential for the Mill to control the grain size and earing ratio (for deep drawing). |
Packaging & Delivery
- Export seaworthy packaging
- Delivery time: 20–35 days
- Shipment: bulk vessel or container
